Understand white balance in filmmaking.

The correct white balance for a scene depends on the color temperature of the light. “In the most basic terms, your white balance tells you that if your whites are off, your color temperature’s off. And if your color temperature is off, you've got to figure out if your camera is set at the wrong color temperature, or if the issue is in your lighting,” says videographer Hiroshi Hara.

How to gauge white balance in different lighting situations.

The first step to solving any white balance issues on set is to learn the color temperatures of the different lights. Unless you work in a controlled environment where you can control the color temperature of your light sources, you’ll need to familiarize yourself with a few standard scenarios to keep your white balance in check.

Daylight

The standard temperature for outdoor natural light is 5,600 degrees Kelvin (K). This means that if you want a white piece of paper to appear white in your shot, you would need to set your white balance to 5,600 K. This is the industry standard setting, but it’s just a starting point. A sunny day with a blue sky might be slightly warmer than an overcast, cloudy day. Sunset and sunrise will almost always have a much lower color temperature than high noon.

Tungsten

For indoor lighting, also referred to as tungsten light, the standard setting is 3,200 K. Light bulbs and other artificial lighting usually have warmer temperatures than outdoor lighting, so if you move your piece of paper from outside to inside, you need to dial down your white balance to compensate for the warmer color temperature. Like daylight, tungsten settings vary across the spectrum, from warm incandescent lights to LEDs that sit closer to daylight temperatures.

Adjust your white balance settings in-camera.

Your eyes adjust automatically to different color temperatures, but cameras can’t. You have to tell your camera the proper white balance for a given scene. While you can do this in post-production, it’s best to get your white balance as close to accurate as possible in-camera. Doing this will save you time in the long run and ensure that you’ve got the proper visual data in your footage to work with when you edit.

This doesn’t mean you have to achieve to-the-degree accuracy. Most digital cameras can shoot in raw format, which leaves a lot of room for editing in post. Hara recommends starting with a white balance preset, like daylight or tungsten, and manually adjusting from there. You can do this in many different ways; here are a few options.

Automatic white balance or manual white balance?

Auto white balance (AWB) is a great choice for beginners. Your camera’s white balance setting is likely good at reading ambient light and making balance adjustments on its own. But if you’re a more seasoned videographer, consider switching to custom white balance to give yourself more control. You’ll also want to set white balance yourself in tricky lighting conditions that can easily fool the camera’s judgment.

White balance cards and gray cards.

Professionals often use these cards to help get the proper exposure and white balance for their shot. “A white balance card is just a fancy term for something that’s white,” says Hara. An official card will give you the most accurate tone and anti-reflective finish, but you can use any pure white object as a stand-in. This card serves as a reference point for your camera, it makes it easier for you to test for the proper balance in situations where you don’t know the color temperature.

A gray card is similar to a white card in that they are both reference points to gauge white balance and exposure. But a gray card is a specific shade of gray made to be completely neutral. This makes it easier for your camera to read the light and choose the best white balance. To use a gray card, simply place it in front of the camera while on custom white balance mode and take a few shots. This is the manual version of using AWB, in which your camera searches for neutral areas in the frame for itself.

Lighting

“Anytime you mix lighting sources, it’s going to make it hard to find your white balance,” says videographer Margaret Kurniawan. Use a single light source, or match every light to the same temperature to avoid different color temperatures across your scene. You can also use a light meter to get a reading on the temperature. Aim for consistency across your set, lighting, and camera so you can minimize time spent correcting colors in post-processing.

Fine-tune your white balance in editing.

Just because you nail your white balance in-camera doesn’t mean you should leave it untouched in post-production. “There are two sides to manipulating white balance,” says cinematographer Mike Leonard. “There’s color correction, which is the science side of it, and then there’s color grading, which is the art of it.” Color correction is about bringing colors back to their accurate tones for a true-to-life look. You can set the correct white balance in-camera and continue this process in post.

Color grading, on the other hand, is a subjective art. “A great movie example of this is The Matrix,” says Leonard. When they’re in the Matrix everything has a harsh green hue, but when they’re in the real world there’s a very distinct blue grade. That was a creative decision to make the two worlds feel very different.”

Whether you want to evoke happiness and nostalgia with warm colors, or cooler, bluer tones for a moodier aesthetic, you can create the look you want with video editing apps like Adobe Premiere Pro.

Best practices for better balancing.

From pre-production to post-production, white balance is a top consideration for every filmmaker. If you’re not sure how to hone your eye for white balance, start out on automatic white balance and adjust from there. Raw files leave plenty of room to tweak when you edit, so don’t worry about getting it exactly right. Try to experiment and familiarize yourself with the spectrum of colors and its corresponding temperatures. To get faster at gauging white balance on set, pay attention to the light off set. Notice the quality of light around you in everyday life; you’ll be surprised how quickly you can develop an eye for different temperatures and white balances.