Understand white balance in filmmaking.

White balance is key to more than just accurate white values in videos. Get familiar with white balance so you can capture accurate colours on set and in editing.

Strips of white cloth sheets

What is white balance?

White balance refers to the colour temperature at which white objects on film actually look white. But it’s not just about the appearance of white; all the colours in your shot are determined by how you set your white balance. This is why photographers and filmmakers plan every scene in consideration of white balance, from lighting to post-production. Learn how to use white balance in your videos, plus get expert tips on how to set, adjust and stylise your white balance.

How does colour temperature affect white balance?

All light resides on a colour temperature scale, which is why different light sources have different colours. Think about the warm orange glow of candlelight compared to the cold, almost bluish beam of fluorescent lights. To measure the temperature of colours, filmmakers use the Kelvin scale. Colours at lower temperatures are warmer and on the red, orange and yellow side of the spectrum: for example, incandescent bulbs or sunset. Colours at higher temperatures have a cooler colour cast to them. Natural light resides on this blue end of the scale.

Colour temperature of daylight vs. nighttime

The correct white balance for a scene depends on the colour temperature of the light. “In the most basic terms, your white balance tells you that if your whites are off, your colour temperature’s off. And if your colour temperature is off, you've got to figure out if your camera is set at the wrong colour temperature or if the issue is in your lighting,” says videographer Hiroshi Hara.

 

How to gauge white balance in different lighting situations.

The first step to solving any white balance issues on set is to learn the colour temperatures of the different lights. Unless you work in a controlled environment where you can control the colour temperature of your light sources, you’ll need to familiarise yourself with a few standard scenarios to keep your white balance in check.

 

Daylight

The standard temperature for outdoor natural light is 5,600 degrees Kelvin (K). This means that if you want a white piece of paper to appear white in your shot, you would need to set your white balance to 5,600 K. This is the industry standard setting, but it’s just a starting point. A sunny day with a blue sky might be slightly warmer than an overcast, cloudy day. Sunset and sunrise will almost always have a much lower colour temperature than high noon.

Colour temperature of daylight on two different buildings

Tungsten

For indoor lighting, also referred to as tungsten light, the standard setting is 3,200 K. Light bulbs and other artificial lighting usually have warmer temperatures than outdoor lighting, so if you move your piece of paper from outside to inside, you need to dial down your white balance to compensate for the warmer colour temperature. Like daylight, tungsten settings vary across the spectrum, from warm incandescent lights to LEDs that sit closer to daylight temperatures.

Photo looking down a subway stairs with tungsten lights overhead

Adjust your white balance settings in-camera.

Your eyes adjust automatically to different colour temperatures, but cameras can’t. You have to tell your camera the proper white balance for a given scene. While you can do this in post-production, it’s best to get your white balance as close to accurate as possible in-camera. Doing this will save you time in the long run and ensure that you’ve got the proper visual data in your footage to work with when you edit.

 

This doesn’t mean you have to achieve to-the-degree accuracy. Most digital cameras can shoot in raw format, which leaves a lot of room for editing in post. Hara recommends starting with a white balance preset, like daylight or tungsten and manually adjusting from there. You can do this in many different ways; here are a few options.

 

Automatic white balance or manual white balance?

Auto white balance (AWB) is a great choice for beginners. Your camera’s white balance setting is likely good at reading ambient light and making balance adjustments on its own. But if you’re a more seasoned videographer, consider switching to customised white balance to give yourself more control. You’ll also want to set white balance yourself in tricky lighting conditions that can easily fool the camera’s judgement.

 

White balance cards and grey cards.

Professionals often use these cards to help get the proper exposure and white balance for their shot. “A white balance card is just a fancy term for something that’s white,” says Hara. An official card will give you the most accurate tone and anti-reflective finish, but you can use any pure white object as a stand-in. This card serves as a reference point for your camera, it makes it easier for you to test for the proper balance in situations where you don’t know the colour temperature.

 

A grey card is similar to a white card in that they are both reference points to gauge white balance and exposure. But a grey card is a specific shade of grey made to be completely neutral. This makes it easier for your camera to read the light and choose the best white balance. To use a grey card, simply place it in front of the camera while on customised white balance mode and take a few shots. This is the manual version of using AWB, in which your camera searches for neutral areas in the frame for itself.

 

Lighting

“Any Time you mix lighting sources, it’s going to make it hard to find your white balance,” says videographer Margaret Kurniawan. Use a single light source or match every light to the same temperature to avoid different colour temperatures across your scene. You can also use a light metre to get a reading on the temperature. Aim for consistency across your set, lighting and camera so you can minimise time spent correcting colours in post-processing.

A person in a green room with a curtain blowing over them

Perfección del balance de blancos en el proceso de edición

El hecho de que conseguiste configurar el balance de blancos adecuado en la cámara no implica que debas dejarlo intacto en la posproducción. “El balance de blancos puede manipularse de dos formas: por un lado, está la corrección del color, que es la parte científica, y, por otro, la gradación del color, que es la parte artística”, explica el cineasta Mike Leonard. La corrección del color consiste en dar a los colores sus tonos exactos para que tengan un aspecto real. Puedes establecer el balance de blancos en la cámara y continuar el proceso en la fase de posproducción.

Por otro lado, la gradación del color es un arte subjetivo. “Un gran ejemplo de esto es la película Matrix”, cerciora Leonard. “Cuando están en Matrix, todo adquiere un tono verde intenso; pero, cuando están en el mundo real, hay una tonalidad azul muy marcada. Dar a cada mundo una apariencia distinta fue una decisión creativa”, agrega.

Tanto si pretendes despertar sentimientos de felicidad y nostalgia con colores cálidos, como si quieres conseguir una estética más melancólica con tonos azulados y fríos, puedes crear el aspecto que quieras con aplicaciones de edición de video como Adobe Premiere Pro.

Prácticas recomendadas para el balance de blancos

Desde la preproducción hasta la posproducción, el balance de blancos es un aspecto primordial que debe tener en cuenta todo cineasta. Si no sabes cómo capacitar el ojo para determinar el balance de blancos, empieza con el balance de blancos automático y ajústalo a partir de ahí. Los archivos sin procesar dejan mucho margen de maniobra para la posterior edición, así que no te agobies queriendo conseguirlo todo a la primera. Experimenta y familiarízate con el espectro de colores y sus correspondientes temperaturas. Para aprender a calibrar el balance de blancos en el set, presta atención a la luz fuera de este. Fíjate en la calidad de la luz que te rodea en el día a día; te sorprenderá lo rápido que puedes aprender a distinguir las diferentes temperaturas y balances de blancos.

Contributors

Do more with Adobe Premiere Pro.

Make visually stunning videos virtually anywhere — for film, TV and web.

You might also be interested in…

Editando un vídeo en el móvil.

Cómo editar vídeos: todo lo que debes saber.

Aprende los principios de la edición de vídeo y consejos prácticos tanto para pantallas grandes como pequeñas.

Pieza colocada sobre esquema

Cómo calibrar tu monitor.


Aprende a ajustar la configuración de color de tu monitor para el video refleje tu visión.

Persona que agrega audio a un video con Adobe Premiere Pro

Mejora videos con el software de edición de videos Adobe Premiere Rush.

Mejora la calidad de los videos con corrección de color y ajustes de audio con estas intuitivas herramientas.

Ejemplo de video con el color corregido frente a otro en el que no se corrigió

Emplea la corrección de color de video.

Aprende a emplear el software de edición para conseguir un color realista, así como cambiar sutilmente el ambiente y el tono.